| Process pressure |
-1 … +64 bar/-100 … +6400 kPa (-14.5 … +928 psig)The function of the instrument is en- sured up to an operating pressure of 100 bar/10000 kPa (1450 psig) at maximum process temperature of +50 °C (+122 °F) (only with threaded versions). |
| Process temperature |
-50 … +250 °C (-58 … +482 °F) |
| Viscosity – dynamic |
0.1 … 10000 mPa s |
| Density |
0.7 … 2.5 g/cm³ (0.025 … 0.09 lbs/in³); 0.5 … 2.5 g/cm³ (0.018 … 0.09 lbs/in³) by switching over |
| Ambient temperature |
-40 … +70 °C (-40 … +158 °F) |
| Hysteresis |
approx. 2 mm (0.08 in) with vertical instal- lation |
| Process fitting |
Threads from G¾, ¾ NPT, flanges from DN 25, 1″, hygienic fittings |
| Operating voltage |
for connection to an amplifier according to NAMUR IEC 60947-5-6, approx. 8.2 V |
| Off-load voltage |
U 0 approx. 8.2 V |
| Short-circuit Current consumption |
I U approx. 8.2 mA |
| Ʋ Falling characteristics |
≥ 2.2 mA uncovered/≤ 1 mA covered |
| Ʋ rising characteristics |
≤ 1 mA uncovered/≥ 2.2 mA covered |
| Ʋ Fault message |
≤ 1 mA |
| SIL qualification |
Optionally up to SIL2 |
