Technical Data:
Dräger Hoods
Approval – respiratory protection | EN 12941 – TH3 (in combination with Dräger X-plore ® 8500 and 8700*)EN 14594 (in combination with Dräger X-plore ® 9300) |
Approval – eye protection | 1 F 3 – EN 166 |
Hood material | Standard hoods: PP/PE |
Premium hoods: PA, PU-coated | |
Visor material | PC |
Size | Size S/M (scope 52 cm up to 59 cm) Size L/XL (scope 57 cm up to 64 cm) |
Weight | Short hoods, standard: approximately 145 g Short hoods, premium: approximately 200 g Long hoods, standard: approximately 205 g Long hoods, premium: approximately 390 g |
Head harness | Adjustable strap (neck area and above the head), sweatband, removable (area of the forehead) |
Hose connection | Hose nozzle Dräger X-plore ® 8000 (behind) |
Air outlet | Permeable material in the chin area |
* Standard long hoods must not be used in potentially explosive atmospheres.
Dräger Full-face masks
Approval | EN 12942 – TM3 (in combination with Dräger X-plore ® 8500 and 8700) |
Mask body | Robust and skin-friendly EPDM (Dräger X-plore ® 6300, 6530, FPS ® 7000); skin-friendly silicone, which is highly flexible at high/low temperatures (Dräger X-plore ® 6570) |
Visor | Scratch-proofed PMMA (Dräger X-plore ® 6300), shock-resistant PC (Dräger X-plore ® 6530, 6570, FPS ® 7000) |
Size | Universal size (Dräger X-plore ® 6000 masks)
Sizes S, M and L (Dräger FPS ® 7000) |
Weight | About 500 g up to 650 g (depending on the model) |
Head harness | 5-point head harness made of SI or EPDM |
Hose connection | Standard thread connection Rd40 (RA) according to EN 148-1 |
Air outlet | Exhalation valve |
Dräger Half masks
Approval | EN 12942 – TM2 (in combination with Dräger X-plore ® 8500 and 8700) |
Mask body | Silicone (black) or blue hard body made of durable PP plastic |
Size | Size S/M Size M/L |
Weight | 160 g and 175 g, respectively |
Head harness | Flexible, robust band made of neoprene (CR/NR) 2 adjusting points FlexiFit TPE head harness Drop-down option |
Hose connection | Standard thread connection Rd40 (RA) according to EN 148-1 |
Helmets with visor, protective visor and welding visor
Criteria | Dräger X-plore ® 8000 helmet with visor |
Dräger X-plore ® 8000 protective visor |
Dräger X-plore ® 8000 welding visor |
Approval – respiratory protection |
EN 12941 – TH2 (in combination with Dräger X-plore ® 8500 and 8700) EN 14594 (in combination with Dräger X-plore ® 9300) | EN 12941 – TH2 (in combination with Dräger X-plore ® 8500 and 8700) EN 14594 (in combination with Dräger X-plore ® 9300) | EN 12941 – TH2 (in combination with Dräger X-plore ® 8500 and 8700) |
Approval – head protection | EN 397 | – | – |
Approval – eye protection | EN 166 1 B 9 3 | EN 166 1 B 9 3 | EN 175 (visor), EN 379 (ADF) |
Material visor | PC (AC available as spare part)* | PC | PC (protective plate outside) |
Material helmet | ABS | – | – |
Material frame of visor | PA | PA | PA |
Material face seal | PA coated with PU | PA coated with PU | Proban ® |
Weight | 630 g | 490 g | 780 g (incl. ADF), 625 g (without ADF) |
Size of visor | 32 cm x 16 cm | 32 cm x 15.5 cm | 9 cm x 11 cm |
Colour | Entire black/white helmet with black frame and face seal |
Black | Black |
Temperature range (operation) | -5 °C to +50 °C | -5 °C to +55 °C | -10 °C to +55 °C |
Head harness | Ratchet, adjustable (51 to 63 cm) Sweatband |
Adjustment wheel (51 to 64 cm) Sweatband |
Adjustment wheel (50 to 60 cm) Sweatband |
Air inlet | Hose connector at the back | Hose connector at the back | Hose connector at the back |
Air distribution | Airduct over the head | Airduct over the head | Airduct over the head |
* Welding visor must not be used in potentially explosive atmospheres.
Please check the individual suitability for use in explosive zones with your Dräger contact.