Available Configurations

■ Single-port, globe-style control valve with cage guiding, balanced valve plug, and push-down-to-close valve plug action.
■ Angle version of  control valve, used to facilitate piping or in applications where a self-draining valve is desired.
■ Same as  control valve except with push-down-to-open valve plug action.

Valve Sizes and End Connection

Maximum Inlet Pressures and Temperatures

Unless limited by maximum pressure drop or material temperature capabilities Valves with Cast Iron Bodies.
Flanged: Consistent with CL125B or 250B per ASME B16.1
Screwed: Consistent with flanged CL250 per ASME B16.4
Valves with Steel and Stainless Steel Bodies. Flanged: Consistent with CL150, 300, and 600(3) per ASME B16.34
Screwed or Welding: Consistent with flanged CL600 per ASME B16.34

Maximum Pressure Drops

Same as maximum inlet pressure for specific construction.

Shutoff Classifications Per ANSI/FCI 70-2 & IEC60534-4

Construction Materials

Body, Bonnet, and Bonnet Spacer or Bottom
Port Diameters and Maximum Valve Plug Travels:Contact Us
Yoke Boss and Stem Diameters:Contact Us
Typical Bonnet Styles:Contact Us

Packing Arrangements

Standard Material: Single PTFE V-ring
Optional Materials: Contact Us

Flange, if used: ■ Cast iron, ■ WCC carbon steel, or ■ LCC/HT carbon steel, ■ WC9 chrome moly steel, ■ CF8M (316 stainless steel), or
■ other materials upon request
Bellows Seal Assembly: ■ 316L stainless steel or ■ N04400
All Other Parts: Contact Us

Material Temperature Capabilities

All Other Parts: Contact Us

Flow Characteristics

Standard Cages: ■ Quick-opening, ■ linear, or equal percentage

Flow Directions

Standard Cage: Normally down
Standard Cage with Liner for Metal Seat:Normally down
Standard Cage: Normally up